Volar Sport | 228mm & 250mm Brake Rotors | 3mm Thick | Fits Volar Calipers Only

Heavy-Duty Brake Rotors for SurRon, E Ride Pro & Talaria

The Volar Sport 3mm Brake Rotors are a substantial braking upgrade for SurRon, E Ride Pro, Talaria, and Segway electric dirt bikes equipped with Volar Sport brake calipers. At a full 3mm thick, these rotors are considerably thicker than standard factory rotors and are designed for riders who are pushing their braking system harder than a stock setup was built to handle.

That extra rotor thickness matters when you're riding a faster or modified e-moto. More rotor material increases the thermal mass of the braking system and provides a more substantial braking surface for repeated hard stops, steep descents, trail riding, and higher-power builds. Paired with the Volar Sport braking system, these rotors are built for riders looking for stronger, more consistent braking performance.

Important: These rotors are designed for Volar Sport brake calipers only. They are NOT compatible with stock brake calipers. We also cannot guarantee compatibility with other aftermarket brake systems due to differences in caliper clearance, pad spacing, brackets, and mounting configurations.

Talaria MX5 Sting Pro Floating Brake Rotors

The Talaria MX5 Sting Pro TL5500 uses a dedicated Volar Sport floating brake disc setup available in 228mm or 250mm. The front and rear of the MX5 use the same brake disc bolt pattern, so these discs can be installed on either the front or rear of the bike when paired with the correct included mounting hardware.

The MX5 Sting Pro setup also includes  Depending on the selected rotor configuration, the kit includes the necessary 4mm caliper spacers or caliper relocation adapter along with the required brake caliper bolts.

Fitment

• Talaria MX3: 228mm rear
• Talaria MX4: 228mm rear
• Talaria XXX: 228mm rear
• SurRon: 228mm rear
• Segway: 228mm rear
• E Ride Pro: 228mm rear
• Talaria MX5 Sting Pro TL5500: 228mm front or rear
• Talaria MX5 Sting Pro TL5500: 250mm front or rear with the required caliper relocation hardware

MX5 Fitment Note: The MX5 Sting Pro brake discs fit either the front or rear because the rotor bolt pattern is the same at both ends. The MX5-specific floating rotor kits are compatible only with the Talaria Sting Pro TL5500.

Please note: These 3mm rotors will NOT fit stock brake calipers. They are made for Volar Sport brake calipers. If your bike is still running the factory brake system, these are not a direct replacement for your stock rotors.

Who Are These For?

• Riders upgrading to Volar Sport brake calipers who need the proper 3mm rotor setup
• Higher-power SurRon, E Ride Pro, and Talaria builds that regularly see harder braking and higher speeds
• Trail, downhill, and aggressive riders looking for a more substantial braking setup than standard factory rotors

If you're building a Volar Sport brake system, the rotor is an important part of getting the complete setup right. These 3mm rotors provide the thickness and braking surface the Volar Sport calipers are designed around, while the MX5 Sting Pro options add a dedicated floating rotor, and the mounting hardware needed for the selected configuration.