Project 9 Formula 4-Piston Performance Brake Pads | E-Motos and Electric Dirt Bikes

Project 9 Formula Performance Brake Pads are engineered for compatible Formula 4-piston calipers found on high-performance e-motos and electric dirt bikes. Developed for the additional speed, weight, and heat generated by electric motorcycles, these pads offer improved heat resistance, durability, and braking performance compared with standard bicycle brake pads.

Important compatibility notice: These pads do not fit Formula EB7 or Formula EB9 E-Moto brakes. The EB7 and EB9 use different brake pads. A four-piston design alone does not confirm compatibility, so compare your existing pad shape and caliper model before ordering.

Choose Your Brake Pad Compound

Ceramic Pro

Ceramic Pro is designed for riders who prefer smooth, predictable braking with precise modulation and low rotor wear. Its linear response works well for commuting, street riding, and everyday e-moto use.

• Friction coefficient: 0.48 to 0.51μ
• Bond strength: 5.71 MPa
• Bond strength comparison: 27% higher than common OEM pads
• Maximum tested temperature: 343°C, 649°F
• Smooth and linear brake feel
• Low dust generation
• Low rotor wear
• Excellent everyday and street performance

Sintered Pro

Sintered Pro is built for aggressive riders who want stronger initial bite, maximum stopping power, and increased resistance to brake fade. It is well suited to repeated hard stops, wet conditions, and demanding off-road use.

• Friction coefficient: 0.55 to 0.60μ
• Bond strength: 6.12 MPa
• Bond strength comparison: 36% higher than common OEM pads
• Maximum tested temperature: 343°C, 649°F
• Aggressive initial bite
• Superior heat resistance
• Excellent wet-weather performance
• Increased fade resistance
• Extended service life under aggressive riding
• Ideal for trail riding, racing, and stunting

Performance Advantages

• Engineered for compatible Formula 4-piston calipers
• Developed for e-motos and electric dirt bikes
• Tested at temperatures up to 343°C, 649°F
• Higher bond strength than common OEM brake pads
• Consistent braking performance under extreme loads
• Easy drop-in installation on compatible calipers
• Race tested and trail proven

Fitment

• Compatible Formula 4-piston brake calipers using this specific pad shape
• Does not fit Formula EB7 E-Moto brakes
• Does not fit Formula EB9 E-Moto brakes

Fitment note: Formula uses different pad shapes across its brake systems. Confirm your exact caliper model and compare the shape of your current pads before purchasing. Do not order these pads for an EB7 or EB9 system.

Which Compound Is Right for You?

• Commuters and street riders: Ceramic Pro offers smooth modulation, low dust, and reduced rotor wear.
• Trail and race riders: Sintered Pro provides stronger bite, better heat resistance, and dependable wet-condition performance.
• Jump and stunt riders: Sintered Pro is designed for repeated hard braking and high-load use.

Whether you are commuting, carving trails, racing, hitting jumps, or practicing stunts, Project 9 Formula Performance Brake Pads provide a compound matched to your riding style and the braking demands of a compatible Formula 4-piston system.