Rippin Moto Motorcycle Rim Strips — Durable Rubber Tube & Rim Protection (Multiple Sizes)

Protect your inner tube from spoke nipples and sharp rim edges with Rippin Moto Rubber Rim Strips. Built for street, dirt, pit bikes, and e-moto, these non-adhesive rim bands add a tough barrier between the rim and tube to reduce pinch flats and premature wear. Choose the correct size variant above for a precise fit.

• Multiple sizes: Select the exact rim diameter/width for your wheel.
• Premium rubber construction: Flexible, durable, and heat-resistant.
• Pre-punched valve hole: Quick, centered install with clean airflow.
• Fewer flats, longer tube life: Shields tubes from spoke ends and burrs.
• Fast install: No tools required—stretch over rim and seat evenly.

Sold individually (one strip per wheel).

Recommended Uses

Works for motocross, enduro, dual sport, supermoto, minis/pit bikes, and popular e-moto platforms. Fitment is by size, not model—match your rim diameter and strip width.

Size Guide

• 10″ × 3/4″
• 12″ × 3/4″
• 14″ × 1.0″
• 16″ × 1.0″
• 18″ × 1.25″
• 19" x 1.0"
• 21″ × 7/8″

Tip: Choose the variant that matches your rim diameter. Wider, larger-bore rims typically use a 1″ band; minis/pit bikes often use 3/4″.

Install Steps

1. Remove tire and tube. Inspect rim for sharp edges; deburr if needed.
2. Stretch the rim strip over the rim. Align the valve hole with the valve opening.
3. Center the band so it fully covers spoke nipples all the way around.
4. Reinstall tube and tire to spec. Inflate and check for even seating.

What’s Included

• 1 × Rippin Moto rubber rim strip (size as selected)

FAQ

Why Rippin Moto

• Tested by riders; built for real-world abuse.
• Fast U.S. shipping and responsive support.
• Parts for the next-gen rider—performance without the fluff.

Common names: rim strip, rim band, inner tube protector, motorcycle rim tape (non-adhesive).