Skip to product information
1 of 4

FX Thumb Throttle | Universal Fitment | By FX Throttles

FX Thumb Throttle | Universal Fitment | By FX Throttles

Regular price $129.95
Regular price Sale price $129.95
Sale Sold out
Lowest price guarantee. 30 day price protection for total peace of mind
model
Color: Black

SKU: SKU:

FX Classic Twist Throttle | Electric Dirt Bikes & eBikes

A good throttle should make it easier to hold your line and feed in power. The FX Classic Twist Throttle pairs a genuine Honeywell Hall effect sensor with a 65° short throw, giving riders a compact rotation and a progressive throttle signal. Three spring tension settings let you choose how much resistance you feel at the grip, whether you spend your time crawling through technical sections or carrying speed on open trails.

The construction is a big part of the appeal. A CNC-machined 6061-T6 billet aluminum housing and throttle tube replace the plastic construction found on many stock assemblies. A pressed-in 440C stainless steel bearing supports smooth rotation with minimal play, while Grade 5 titanium screws add corrosion resistance without unnecessary weight.

Predictable Input, Comfortable Reach

The Honeywell Hall effect sensor delivers a linear output of approximately 0.87V to 4.2V. That progressive signal helps a compatible, correctly configured controller translate wrist movement into controlled power delivery. The 65° rotation keeps full throttle within a short twist while leaving room to make smaller adjustments through corners and uneven terrain.

Throttle feel also depends on your controller settings and calibration. If your controller supports throttle calibration, complete that setup after installation so it recognizes the Classic's operating range.

Three Spring Tension Settings

  • Light: The lightest return resistance, useful for technical trails where frequent, small throttle adjustments matter.
  • Medium: The factory setting, offering balanced resistance and return feel for general riding.
  • Firm: The strongest return resistance for riders who prefer a deliberate twist and a more pronounced snap-back.

Built Around Quality Components

FX machines the Classic from solid 6061-T6 aluminum billet, an alloy used in aerospace components, bicycle frames, and motorsport hardware. The manufacturer lists a tensile strength of 310 MPa, compared with its cited 40 MPa plastic reference, along with CNC machining tolerances of ±0.01 mm and an approximate weight of 85 g.

The 440C stainless steel bearing supports the rotating assembly inside the aluminum housing. Ti-6Al-4V Grade 5 titanium fasteners keep the hardware lightweight and corrosion-resistant. FX describes these fasteners as stronger than steel at 40% less weight.

An IP65 weather rating provides protection against dust ingress and water jets, making the Classic suitable for exposed riding conditions. IP65 does not cover submersion.

Color options include Black, Red, Blue, Silver, and Purple. Each uses an anodized finish integrated into the polished aluminum surface rather than a painted layer.

Technical Specifications

  • Model: FX Classic Twist Throttle
  • Housing and throttle tube: 6061-T6 billet aluminum
  • Manufacturing: CNC-milled
  • Listed machining tolerance: ±0.01 mm
  • Listed material tensile strength: 310 MPa
  • Approximate weight: 85 g
  • Sensor: Genuine Honeywell Hall effect
  • Output voltage: Approximately 0.87V to 4.2V, linear
  • Rotation: 65° short throw
  • Handlebar diameter: 7/8 inch, 22.2 mm
  • Wire lead: 120 cm, customizable; select bike-specific versions use a shorter cable
  • Default connector: Surron-style, with application-specific connector options
  • Fasteners: Ti-6Al-4V Grade 5 titanium
  • Bearing: 440C stainless steel, pressed into the housing
  • Weather rating: IP65
  • Spring tension: Three adjustable settings
  • Factory spring setting: Medium
  • Anodized colors: Black, Red, Blue, Silver, Purple
  • Warranty: 1 year
  • Manufacturer-listed price: $169.95

Bike & Controller Fitment

Match the connector to your bike and controller before ordering. Some listed applications require start-button wiring changes, connector trimming, an adapter, or controller calibration. FX does not currently list a connector solution for bikes outside its fit guide.

  • Surron Light Bee, Light Bee 2, Ultra Bee; Segway X160 and X260: Plug-and-play with the standard Surron connector. Light Bee 2 and Ultra Bee versions include a shorter cable.
  • Surron Light Bee or Ultra Bee with EBMX X-9000, Torp, Ventus, or another aftermarket controller using a Surron connector: Calibrate before use through the controller's app. The Ultra Bee selection includes a shorter cable.
  • E Ride Pro S and 2.0: Uses the standard Surron triangular connector. Connect the stock throttle's start-button wires together or install a separate handlebar-mounted momentary button to replace the stock park button.
  • E Ride Pro 3.0 and SR: Uses the standard Surron connector. Disable the start button in the E Ride Pro app or install a separate handlebar-mounted momentary button to replace the stock throttle button.
  • Talaria MX3: Uses the standard Surron connector. Connect the start-button wires together or install a separate handlebar-mounted momentary button to replace the park button.
  • Talaria MX4, MX5, and XXX: Uses a 5-pin circular green connector. The supplied FX cable automatically bypasses the start button. Trim the tubing on the controller-side connector until it is flush with the green connector face for proper fit.
  • Y-Volt Surge V: Plug-and-play with a 5-pin green male circular connector.
  • Altis Sigma: Compatible with 2025 and 2026 models using the 3-pin rectangular white connector. A version for the 8-pin white square connector is not currently available.
  • Ventus 1+ with v1.7 throttle: Plug-and-play with a 3-pin white rectangular connector.
  • MACFOX bikes with a stock thumb throttle: Plug-and-play with a 3-pin male yellow or orange circular connector.
  • RAWR Mantis Pro: Plug-and-play with an M7 small yellow 3-pin circular connector.
  • Bonnell 775MX: Plug-and-play with a 3-pin female yellow or orange circular connector.
  • Zooz Gen 1: Plug-and-play with a 3-pin male yellow or orange connector.
  • Zooz Gen 2, Gen 3, Gen 4, and Flex: Plug-and-play with a 3-pin male yellow or orange connector.
  • Throne Strike Shadow: Plug-and-play with a Surron-style male connector.
  • SRPNT Z27 and X8: Plug-and-play with a standard Surron female connector.
  • Tuttio Solei 01: Requires an adapter that provides a standard Surron throttle connection. Confirm the appropriate adapter through FX's installation information before ordering.
  • Juiced eBikes: Plug-and-play with a 3-pin male circular orange or yellow connector.
  • Arctic Leopard bikes: Plug-and-play with a 3-pin female white rectangular connector.
  • Yozma IN 10: Uses a standard Surron male-side connector. Alternatively, the wires can be cut at the handlebar and soldered directly using FX's model-specific wire-color connection guide.
  • BAC4000, BAC855, and BAC8000 controllers: Calibration is required in the controller settings. A connector is not supplied for these applications; the wires must be joined or soldered.
  • Fardriver controllers: FX lists compatibility with all Fardriver controllers, with calibration required after installation. A connector is not supplied; the wires must be joined or soldered.
  • VESC-based controllers: Configure for the Classic's 0.87V to 4.2V output and use VESC Tool for auto-calibration. Supply and install a suitable connector or solder the wires. The FX Pro uses a different 0.83V starting voltage.
  • Falcon Pro and Falcon GT: Not compatible with the FX Classic. These require the FX Pro with its 5-pin green female circular connector and supplied start-button bypass cable.
  • 79Bike Falcon Lite: Not compatible with the FX Classic. This application requires the FX Pro with a 3-pin male orange or yellow connector.

A Good Fit For

  • Technical trail riders: Riders who value small, controlled throttle inputs and want a lighter return setting for frequent adjustments.
  • Everyday eMoto and eBike riders: Owners looking to replace a plastic throttle assembly with machined aluminum, bearing-supported rotation, and titanium hardware.
  • Riders dialing in an upgraded controller: Builders who want a linear Honeywell sensor signal and adjustable spring resistance to complement a properly calibrated setup.
View full details

Fitment: FX Thumb Throttle | Universal Fitment | By FX Throttles

  • Surron Light Bee X
  • Surron Light bee S
  • Segway X260
  • Segway X160
  • Talaria Sting MX3
  • Talaria Sting MX4
  • Talaria XXX
  • Eride Pro
  • Eride pro S
  • Eride pro SS
  • Srpnt Moto By throne
  • Ventus one
  • Ventus one+ plus
  • 79bike Falcon-M
  • SRPNT X3
  • Rerode R1
  • Rerode Ewatt 2.0
  • Rawrr Mantis
  • Rawrr Mantis X
  • Apollo/RFN Ares Rally Pro
  • Beta Explorer Emoto
  • Rawrr Mantis Mini R
  • Talaria Sting MX5
  • Eride pro SS 2.0
  • Vetra Blazer
  • Arctic Leopard XE Pro
  • Strike Shadow by throne
  • Arctic Leopard XE Pro S
  • Eride pro SR
  • Eride pro SS 3.0
  • Strike Shadow SX by Throne
  • 79 bike Falcon Pro
  • Rawrr Mantis Mini
  • Eride pro Mini
  • Altis Sigma
  • Altis Sigma 2026
  • Surron Light bee 2
  • Eride pro SS 4.0
  • Arctic Leopard XE Pro R
  • 79 bike Falcon GT
  • Rawrr Mantis X pro
  • Srpnt X8 by Throne
  • Srpnt Z27 by Throne
  • ReRode R1+

This product may be compatible with more models than shown above. Please see the product description for full details, or contact us for help with fitment.