E-Dirty Bikes Black Stripe Swingarm Bearing Kit | E Ride Pro SR, 4.0, 3.0 and 2026+ 2.0

Heavy-Duty Sealed Bearings for 12mm Mid-Shaft Swingarms

The eDirtyBikes exclusive Black Stripe Swingarm Bearing Kit is a high-quality replacement for worn or loose factory bearings on compatible E Ride Pro electric dirt bikes. Built from GCr15 bearing steel, these deep-groove bearings are designed to handle heavier loads and higher rotational speeds than the stock bearings, helping deliver longer service life in demanding riding conditions.

Rubber seals help keep dirt, dust, and moisture away from the bearing surfaces. That added protection matters on an electric dirt bike, where repeated jumps, rough trails, washouts, and regular cleaning can expose the swingarm assembly to contamination. Fresh, properly installed bearings can reduce unwanted swingarm play and help the rear suspension move smoothly and predictably.

This kit is made for E Ride Pro models equipped with the 12mm mid shaft. Always confirm your model year and shaft diameter before ordering because earlier 10mm configurations require different bearings.

Technical Information

• Brand: DirtyBikes
• Product line: Black Stripe Bearings
• Product type: Swingarm bearing kit
• Bearing style: Deep-groove, rubber-sealed bearings
• Bearing material: High-quality GCr15 steel
• Mid-shaft size: 12mm
• Performance benefit: Built to withstand heavier loads and higher speeds than stock bearings
• Recommended service: Swingarm maintenance and bearing replacement

Fitment

• E Ride Pro SR
• E Ride Pro 3.0
• E Ride Pro 2.0, model year 2026 and newer, with 12mm mid shaft

Does not fit: 2025 and older E Ride Pro 2.0 models or E Ride Pro S models equipped with a 10mm shaft.

Important Installation Note

Swingarm bearings cannot be pressed completely through the swingarm. The inside bearings must be removed toward the inside, and the outside bearings must be removed toward the outside. Using the correct bearing removal tool and working in the proper direction helps prevent damage to the swingarm and bearing seats.

A Good Fit For

• Trail riders who regularly expose their bike to dirt, dust, water, and rough terrain
• Hard riders looking for stronger, longer-lasting swingarm bearings than the stock parts
• E Ride Pro owners repairing swingarm play or completing preventive chassis maintenance

GET THE BEARING  REMOVAL TOOL HERE