Rippin Moto 2mm Performance Duty Inner Tube | Pit Bikes & Minis 90/100-14

The Rippin Moto Performance Duty 14-inch Inner Tube is built for e-moto, pit bike, and motocross riders who need more protection than a standard tube without adding excessive weight. Its reinforced 2mm wall provides a practical balance of strength, flexibility, and responsive handling.

Made from 100 percent natural rubber with no butyl blend, this tube is designed for compatible 90/100-14 and 3.00-14 tires. It is an excellent choice for 14-inch rear wheel setups on electric dirt bikes, pit bikes, minis, and small-displacement motocross bikes.

Built for Small Wheels and Hard Riding

Small-wheel bikes can place substantial loads on an inner tube when crossing rocks, roots, potholes, and sharp trail edges. The reinforced 2mm construction helps resist pinch flats and punctures while remaining flexible enough to move naturally with the tire.

Keeping the tube near 1 pound helps avoid unnecessary rotating weight. This allows the wheel to remain responsive while still providing more protection than many stock inner tubes.

Key Features

• 100 percent natural rubber: High-grade rubber with no synthetic butyl blend for a strong and flexible construction
• Reinforced 2mm wall: Tougher than many stock tubes while keeping weight manageable
• 10 MPa tensile strength: Built to withstand demanding e-moto, pit bike, and motocross use
• TR4 metal valve stem: Centered, threaded, and vulcanized for a secure seal
• Purpose-built sizing: Designed for compatible 90/100-14 and 3.00-14 tires
• Quality checked: Individually boxed and pressure-tested

Technical Specifications

• Tube size: 90/100-14
• Compatible tire size: 3.00-14
• Material: 100 percent natural rubber with no butyl blend
• Wall thickness: Reinforced 2mm
• Tensile strength: 10 MPa
• Valve type: TR4 metal valve, centered, threaded, and vulcanized
• Weight: Approximately 1 pound
• Application: E-moto, pit bike, mini, and motocross
• Packaging: Individually boxed and pressure-tested

Fitment

• Sur-Ron Light Bee and LBX with a compatible 14-inch wheel setup
• Talaria Sting MX with a compatible 14-inch wheel setup
• Segway X160 with a compatible 14-inch wheel upgrade
• Segway X260 with a compatible 14-inch wheel upgrade
• Pit bikes and minis using compatible 90/100-14 or 3.00-14 tires
• Gas-powered 110cc to 150cc small motocross bikes using compatible 14-inch front or rear tires
• SSR 125 rear wheel
• Apollo 125cc rear wheel
• TaoTao 125cc DB14 rear wheel
• TaoTao 125cc DB17 rear wheel
• Coolster 125cc dirt bike rear wheel
• Piranha 140cc pit bike rear wheel
• GPX 140 pit bike rear wheel
• GPX 150 pit bike rear wheel
• RFZ 125 rear wheel
• RFZ 140cc rear wheel

Fitment note: Confirm the size printed on the tire sidewall before ordering. The wheel must be 14 inches in diameter and use a compatible 90/100-14 or 3.00-14 tire. Bike model alone does not guarantee fitment if the original wheels or tires have been changed.

Installation Tips

• Apply a light dusting of talcum or baby powder to reduce friction between the tube and tire.
• Inspect the inside of the tire for thorns, wire, sharp debris, or other objects before installing the tube.
• Check the rim strip for damage, exposed spoke ends, or sharp edges.
• Keep the TR4 valve stem straight and avoid pinching the tube with tire tools.
• Inflate the tube slowly and evenly so it can settle correctly inside the tire.
• Confirm that the tire bead is seated evenly before setting the final pressure.

Why Choose the Rippin Moto Performance Duty Tube?

This tube stands out through its combination of a reinforced 2mm wall, flexible natural rubber, 10 MPa tensile strength, and a secure vulcanized TR4 valve stem. It provides additional flat protection for hard riding while keeping the wheel responsive and the overall weight manageable.

Recommended For

• E-moto riders using compatible 14-inch wheel conversions
• Pit bike and mini riders who need more protection than a standard inner tube
• Motocross riders using 90/100-14 or 3.00-14 front or rear tires